Deflection Solution for Stainless Steel Conveyor Belt

1. The deviation of the stainless steel conveyor belt of the heavy hammer type tensioning belt conveyor. The belt conveyor of the weight type tensioning equipment can be treated with a balance weight when the transmission belt is deviated, and it is only necessary that the transmission belt does not deviate. But do not add too much, so as to prevent the transmission belt from assuming excessive excessive tension and reduce the service life of the transmission belt.

2. Spiral type tensioning or hydraulic machine tensioning stainless steel conveyor belt deviation application When the spiral type tensioning or hydraulic machine tensioning belt conveyor has deviation, the tensioning stroke arrangement can be adjusted to expand the tensioning force. However, sometimes the tightening schedule is insufficient, and the transmission belt has been deformed for a long time. At this time, the transmission belt can be cut off and the vulcanized rubber can be carried out again.
3. The use of nylon belt or EP for stainless steel conveyor belts requires a longer tightening schedule. When the schedule is insufficient, the rubber can be vulcanized again or the tightening schedule can be increased.
The stainless steel conveyor belt is the main equipment of the transportation system software, and its comprehensive and smooth operation immediately endangers the manufacturing work. The deviation of the direction of the stainless steel conveyor belt is a mechanical failure of the belt conveyor. The immediate and correct solution to it is to ensure its safety and smooth operation. There are many situations and reasons for the deviation of the direction, and the difficulties can be solved reasonably by adopting different adjustment methods according to the deviation of the direction and the reasons.